GREENMIND SHINE Floor finish
Properties

GREENMIND SHINE is floor-coating product which gives high polish, being not slippery, not sticky, and does not catches dust. This product will keep the floor looking its best and reduce the wear and abrasion on the floor surface. The floor will be also long-lasting to floor cleaning solution. Suitable for polished floor, vinyl tile, clay tile, marble, and slate.

PACKING SIZE : 3.8 L.,20 L.

Keep the floor looking its best and reduce the wear and abrasion on the floor surface. Suitable for polished floor, vinyl tile, clay tile, marble, and slate.

1. Strip with GREENMIND STRIP then rinse with clean water at least 2 times, and dry the floor completely.
2. Remove dust with a dust control mop.
3. Pour GREENMIND GLOSS in a plastic container.
4. Apply coat of GREENMIND GLOSS from a polycotton mop.
5. Let it dry for 15 minutes and coat again. Repeat the process for 2-3 times.
6. For more polish, coat the area repeatedly. (not over 5 times.)

In case of coating porous surfaces
(Natural stone, slate and marble) The surface should be coated with GREENMIND SEALER by using clean mop to apply the coating. Let it dry for 30 minutes.

In case of abrasion solution
Diluted GREENMIND GLOSS in ratio of 1 part per 10 part of clean water, and then apply.

Caution : Do not use for ceramic tile floor.

N.A.

Product
Where to buy

Think Better

Contact Us



Tel: +66 2 149 5296-8
Fax: +66 2 149 5299

© 2014 - 2015 Greenmind, all rights reserved .
FOLLOW US:
Tel:   +66(0) 2 149 5296-8
Fax: +66(0) 2 149 5299
© 2014 - 2020 Greenmind, all rights reserved .